The 65 Tonne Press is easy to use with an electric hydraulic pump with a
vertical above mounted cyl..
This machine is used to form test flutes in medium in preparation for crush tests. Temperature is ma..
The Constant Deflection Compression Tester is designed to measure the change of thickness of a polyu..
The Constant Deflection Static Force instrument determines the loss of indentation force deflection ..
The Contact Angle tester is designed to check surfaces properties for contamination, adhesion and pr..
Designed for testing and evaluating Innerspring and Boxspring mattresses. There are several differen..
The sample cutter (C0016) is used to accurately prepare specimens for testing. Crease and stiffness ..
Used to measure the force required to bend board in machine and cross directions of grain. The value..
Used to measure the force required to bend board in machine and cross directions of grain. The value..
The C0039-M2 offers the same capabilities as the C0039, with the added functionality of being able t..
Used to monitor scoring equipment to ensure box performance, by measuring the bending resistance of ..
The C0039-M2 is specifically designed to determine the crease recovery for cartons with rounded corn..
The Crockmeter is designed to determine colour
fastness from dry or wet tests. A test specimen is
..
The Elcometer 1542 is ideal for measuring the cross hatch adhesion of coatings up to 250μm (9.8mils)..
The kit is ideal for measuring the cross hatch adhesion of coatings up to 250μm (9.8mils) on flat su..
Categories
- Block Heaters (1)
- CAL Thermocouples (4)
- Centrifuge / Hydroextractor (2)
- Climatic Chambers (2) +-
- Controllers Basic (5)
- Indicators & Alarms (14)
- Multi Loop Controllers (3)
- Paperless Recorders (3)
- Refrigerated Incubators (5)
- Single Loop Programmers (6)
- Thermal Cycler (1) +-
- Thyristors (1)
- Water Bath (2)