Technical features:
-Working temperature from +5°C above ambient to +55°C.
-Outer case in stainless epoxy painted steel plate with acid and rust-proof groud
-Inner chamber in stainless steel (AISI 304).
-Stainless steel water jacket, capacity 50 litres (distilled water)
-Inner glass door.
-Double-wall heated front door (anti-condensation), outside enamelled steel,
inside stainless steel.
-Heating through stainless steel sheated resistor of 1000 W.
-CO2 range up to maximum 20%
-CO2 regulation through electronic injection system.
-Quick CO2 recovery device for door open.
-Digital thermostat with microprocessor allowing P.I.D. auto-tuning to control CO2% and temperature.
-Safety thermostat with alarm light for over-temperature and set CO2 fluctuation.
-Stainless steel water tray in inner chamber to provide humidity.
-CO2 inlet connector.
-CO2 sample connector.
-Pressure rilief valve.
-Visible liquid level monitor for water jacket with drain tap.
-Mains switch, mains lead with safety fuses.
-Pressure connector and plastic pipe for CO2 included.
-2 holed stainless steel trays plus 1 water tray (humidity) included
-220 V. – 50 Hz. Single Phase.
-Opional extra shelves and epoxy painted steel trolley available.
 

Internal dimensions (W x D x H) cm. 62 x 55 x 60 – Capacity: 204 litres
External dimensions (W x D x H) cm. 100 x 75 x 85 – 
Shipping dimensions (W x D x H) cm. 115 x 90 x 110 
Net weight: kg. 140
Shipping weight: kg. 200
 

The post WATER JACKETED CO2 INCUBATOR mod.2000 appeared first on The Tech Lab.